I'm wondering if you can help me with winterizing my ski. I have heard to put fuel stabilizer in a full tank, partly full ect. Also make sure no water in system and put a bit of motor oil in each spark plug hole. Kind of a variety of efforts, and I'm wondering if you could help me in the correct way to winterize my jet ski?
Henry Hi Henry, When winterizing a ski, I put fuel stabilizer in a full tank of fuel and run the motor to make sure that the fuel stabilizer gets into the fuel system completely. Then while ski is running, pour antifreeze into cooling system until it comes out at the exhaust, then squirt fogging oil into the carburetor until the motor stalls. This whole operation should take about 30 minutes with no water hooked up. Then you remove the spark plugs and poor about an ounce of motor oil in each cylinder and turn the motor over to make sure that the oil coats fully. Then you should check the pump for water under the cap and re-seal the pump if it has been exposed to water. Then you should lubricate all fittings and moving parts (steer, trim ect..) Tech
0 Comments
Leave a Reply. |
Details
Jet Ski & Boat Magazine - Your Ultimate Guide to Water AdventuresWelcome to Jet Ski & Boat Magazine E Zine, your go-to source for all things related to water sports and personal watercraft. Our E zine magazine is dedicated to providing you with the latest news, tips, and stories from the world of jet skiing, boating, and other exciting water activities. Categories
All
Archives
|